Black Berkey Replacement Elements & PF2 Fluoride (Combo)

Black Berkey®️ Replacement Filter Element Set

The Black Berkey®️ Element is the most powerful gravity-fed water filter on the market, removing a wide array of contaminants. Sold in pairs, use these to replace existing filters in the Berkey®️ system or use alongside other elements to increase or maximize the filtration capacity in the larger Berkey®️ systems. Each element includes a full manufacturer’s warranty.

Black Berkey®️ Element Water Filters

In searching for the best water filter system available, many consumers discover that the Berkey®️ stands alone. When using the Black Berkey®️ Elements, tests have shown that even the most heavily contaminated water can be rendered thoroughly safe! No other gravity-fed filter can achieve this level of filtration.

What does the Berkey®️ remove from water? Learn more about the wide range of toxins, chemicals and heavy metals that the Berkey®️ removes.

*Using Black Berkey® Elements with water containing mineral salts, brackish water, or saltwater voids all warranties and returns.

Black Berkey Elements Remove:

TRIHALOMETHANES

Removed to below detectable limits:

Bromodichloromethane – Bromoform – Chloroform – Dibromochloromethane

Health effects: muscle & nervous system disorders, cancer

RADIOLOGICALS

Removed to below detectable limits:

Radon 222

INORGANIC MINERALS

Removed to below detectable limits:

CONTAMINANT

HEALTH EFFECTS

Chlorine Residual

Cancer, Birth Defects

Volatile Organic Compounds (VOCs)

Removed to below detectable limits

Alachlor

Atrazine

Benzene

Carbofuran

Carbon Tetrachloride

Chlorine

Chlorobenzene

Chloroform

2,4-D

DBCP

p-Dichlorobenzene

o-Dichlorobenzene

1, 1-Dichloroethane

1, 2-Dichloroethane

1, 1-Dichloroethylene

cis-1, 2-Dichloroethylene

Trans-1,2-Dichloroethylene

1, 2-Dichloropropane

cis-l,3-Dichloropropylene

Dinoseb

Endrin

Ethylbenzene

Ethylene Dibromide (EDB)

Heptachlor

Heptachlor Epoxide

Hexachlorobutodiene

Hexachlorocyclopentadiene

Lindane, Methoxychlor

MTBE

Pentachlorophenol

Simazine

Styrene

1,1,2,2-Tetrachloroethane

Tetrachloroethylene

Toluene

2,4,5-TP (Silvex)

1,2,4-trichlorobenzene

1,1,1-trichloroethane

1,1,2-trichloroethane

Trichloroethylene

o-Xylene

m-Xylene

p-Xylene

HEAVY METALS reduced by up to 95%:

CONTAMINANT

HEALTH EFFECTS

Lead

kidney, nervous system damage

Mercury

kidney, nervous system disorders

Aluminum

respiratory, nervous system disorders

Cadmium

kidney damage

Chromium

liver, kidney, circulatory system disorders

Copper

gastro-enteric diseases

About the Berkey® PF-2™ Fluoride and Arsenic Reduction Elements Set

Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of ‹1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).

Need to filter for arsenic? This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations.

REPLACEMENT:

Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons (the Berkey Light®️ is 2.5 gallons therefore the PF-2 filters should be replaced after 400 refills. If the system is refilled about one time per day, the PF-2’s should be replaced annually, if the system is refilled about twice per day, the PF-2’s should be replaced about every six months). Actual capacity is dependent on the presence of other competing contaminants in the water. High levels of Fluoride, arsenic and heavy metals may reduce the capacity and efficiency of the elements.